Filter By:
Cables
$64.99
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm
$79.99
Original equipment hydraulic hoses for no-compromise brake performance.
- 2000mm, black
$20.00 - $49.99
$46.99 - $49.99
Up to 60% Off
The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement.
- Pro Slick Polished inner cables reduce friction and have no coating to wear off
- Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance
- Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included
- Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing
- Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits
- Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation
$11.99 - $17.49
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification
$13.99
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing.
- Rubber coated adjusting knobs for firm grip
- Adjustable on the fly
- 4mm
$4.89 - $11.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$2.99
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned.
- Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch
- Bag of 10
$15.00
$44.99
67% Off
Upgrade the performance of your brakes with this convenient kit that includes all parts needed for smooth and reliable performance.
- This smooth and reliable kit is a great performance upgrade for your bike
- Compatible with nearly all braking systems
- Low-friction cables are 2300mm and 1700mm long, for front and rear brakes
- Black compressionless housing comes pre-lubed is 3000mm long
- Kit includes Elite brake ferrules, frame protectors, and cable end caps
- Included stainless steel cables are rust-proof and come pre-stretched
- Housing diameter: 5mm
$63.49
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$36.99
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs
$63.49
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$36.99
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs
$51.49
- Aluminum cable crimps to prevent frayed cables
- 1.2mm for shift cables or 1.6mm for brake cables
- Silver aluminum
- 250-count bottle
$12.99
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$219.99
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product
$56.49
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm.
- Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355
- Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355
- Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers
- Straight connection at lever and caliper
$52.49
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)
$148.00 - $169.00
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating
$74.00 - $84.00
- Brake casing has internal lining and external plastic coating
- Length: 30m
$49.00
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$11.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$70.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Black Banjo Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature a black banjo fitting at the caliper
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key
- Compatible with Level ULT, Level TLM (A1), Code R/RSC (B1), RED eTap HRD, S900 Monoblock
$75.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Beveled Banjo Hydraulic Brake Hose Kit fits SRAM road bike brakes that feature a beveled banjo fitting at the lever
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, extra banjos, hose clips, and T8 Torx L-Key
- Compatible with Flat Mount, RED 22, Force 22, Rival 22, Force 1, Force CX1, Apex1 HRD, S700
$70.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Threaded Crimp Hydraulic Brake Hose Kit fits SRAM mountain bike brakes that feature a threaded crimp fitting at the caliper
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 2 compression nuts, hose clips, and T8 Torx L-Key
- Compatible with Elixir 5, Elixir 7, Elixir 9, Elixir R, Elixir CR, Elixir, X0, Elixir CR Mag, Guide RSC (A1), Guide RS (A1), Guide R (A1), DB5, Level TL
$26.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$13.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
$256.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$100.00
Includes:
- 1.1mm elite cables (2 x 2300mm)
- 4mm reinforced linear strand housing
- Ferrules, end caps, frame protectors
$20.00
- Front or rear brake compatible
- Road specific
- 1.5mm polished stainless steel cable
$57.00
Includes
- 1.5mm coated cables (1 x 850mm, 1 x 1750mm)
- 5mm Kevlar-reinforced compression-free housing
- Ferrules, end caps, frame protectors
$21.00
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable
$9.00 - $14.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
$9.00
- Left and right shifter compatible
- Road and MTB compatible
- 1.1mm polished stainless steel cable
$5.99
Traditional bolt style straddle cable hanger.
Product Specifications
- Size: Universal
- Material: Steel
- Weight: 0.6oz
$11.49
Straight brake cable featuring a 1.5mm pre-stretched inner cable with a tight coil housing and steel cable ends.
Product Specifications
- Length: 50"
- Weight: 3.4oz
$31.95
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance.
Tech Specs
- Housing: Coated linear strand
- Wire: 1.5mm Pre-stretched slick wire
- Length: 50"
- Lug: Two-piece bind-free brass
- Fits: Frames with 245mm cable stop distance
- Weight: 3.0oz
$27.95
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.
$21.99
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Length: 50"
- Lug: Traditional cast
- Weight: 2.5oz
$27.95 - $29.95
The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Length: 50"
- Lug: Two-Piece Bind Free Brass
- Weight: 2.0oz
$28.95
A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing.
TECH SPECS
- Size: Universal
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Lug: Multi-Length Trimmable Lug System
- Weight: 3.4oz
$25.95
The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Lug: Unique, single, cast lever lug
- Weight: 2.3oz
$46.53
Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance.
The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style.
- Precise, compressionless shifting performance combined with extreme flexibility
- Each kit comes with links pre-installed on housing segments making setup quick and simple
- Ultra-slick polished inner cables minimize system friction
- Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing
- Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame
- Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately
$31.99
Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance.
The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits.
- The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance
- All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike
- The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run
- 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos
What's Included:
- 1x 2200mm LEX-SL Shift Housing
- 1x 2800mm Pro Polished Slick Shift Inner Cable
- 2x Sealed Alloy End Caps
- 4x Lined Alloy End Caps
- 1x Hooded Alloy End Cap
- 1x Cable Tip
- 1x 5G Tube Top
- 3x Cable Donuts
- 1x Rotating Hook
$21.26
A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub.
- Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes
- Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability
- Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub
- OEM-level cables and housing with high-quality small parts
$29.24
A great replacement for OE cables and a perfect way to bring style to a bike, our 2x Sport Shift kits make it easy. They come with weld-cut single-ended Slick Stainless cables for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This 2x kit is designed for use on bikes with both front and rear derailleurs.
- Single-ended shift cables are compatible with SRAM and Shimano shift levers for both road or mountain bikes
- Sport Slick Stainless cables combined with Slick-Lube liners offer dependable shifting performance and durability
- Includes everything needed for a complete shift cable and housing replacement for front and rear derailleurs
- OEM-level cables and housing with high-quality small parts
$10.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
$49.99
Open end caps have no o-ring or nylon ring.
- Step-down design mates 5mm housing with 4mm stops
- Material: chrome-plated steel
- 100-pack
$16.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
$7.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package.
- Non-extruded galvanized inner cable
- Compatible with Mountain and Road for Shimano/SRAM
- Lead-free PVC housing
- Enough cable and housing for one brake
- Black
$5.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package.
- Non-extruded galvanized inner cable
- Lead-free PVC housing
- Double ended for SRAM/Shimano and Huret/Simplex
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
- Color: Black
- Diameter: 1.2mm
- End Type: Shimano/SRAM
- Housing Diameter: 5mm
$4.99
Basics brake cables provide value on a budget.
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Pre-stretched
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Color: Silver
- Diameter: 1.6mm
- Length: 2795mm
$14.99
DIY Kit Includes:
- Housing and Brake Cable
- End caps and cable tips
- Compatible Shimano/Sram
$28.99 - $33.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$6.99 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$14.99 - $16.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.
Page 1 of 2
Next page