- Cover protects your bike from dirt and water when transporting it on the rear bike rack of your car - Easy to mount, very little impairment of visibility while driving, and suitable for trunk or hitch-mounted bike racks - Fits the contours of your bike with special straps - Material is durable, waterproof, and UV Protective - MTB version fits: Mountain bikes and e-bikes with handlebars up to 80cm - Road version Fits: Road Bikes with drop bars

Looking for the ultimate bike storage solution? Safely and securely store your bike without any heavy lifting with our Steadyrack Classic Bike Rack. Designed to pivot up to 160 degrees and fold away for maximum storage space efficiency, our Classic Racks can be mounted on virtually any wall. Not suitable for bikes with permanent or fixed front fenders. Specialized, Aero, Time Trial & Other Racing, or Road Bikes A minimum clearance of 20mm / 3/4 inches between your bike's front tire and down tube is required to load your bike into the Classic Rack. Some Specialized bikes, aero bikes, road bikes, other racing bikes and all-time trial bikes with less clearance will require our Fender Rack. Please check your bike's suitability. Technical Specifications: - Dimensions: 12cm x 12cm x 72cm - Weight: 3.1kg - Material: Zinc plated steel and plastic - Maximum Tire Width: Up to 2.1" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style: eBikes, Road, Hybrid, Small MTB, BMX - Bikes With Fenders: No - Bikes Without Fenders: Yes - Maximum Recommended Weight: 35kg Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

The Steadyrack Fat Bike Rack is one of the only bike racks on the market that caters specifically to bikes with tires greater than 3 inches. The Steadyrack Fat Rack can be mounted to virtually any wall and will swivel almost 160 degrees from side to side. It minimizes space without compromising safety and there is no heavy lifting required. This is a truly revolutionary way to store a lot of bikes without taking up much space. Designed for tires 2. 2" to 5", bikes without fenders & with a maximum weight of 77 lbs. E-bike compatible. Not for use with fenders. Technical Specifications: - Dimensions: 12cm x 12cm x 85.5cm - Weight: 4.3kg - Material: Zinc plated steel and plastic - Maximum Tire Width: 2.8" to 5" - Recommended Wheel Diameter (inc tire): 20'' – 29'' - Bike Style: Fat Bikes, eBikes with 'Fat' Tires - Bikes With Fenders: No - Maximum Recommended Weight: 35kg Installation We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

The Steadyrack Mountain Bike (MTB) Rack is designed with larger and stronger folding arms to handle both regular MTB tire sizes as well as plus-size tires. In fact, our MTB bike rack is also suitable for any bike with larger tire sizes and including eBikes and heavy bikes up to 35kg. If you have different brands and models of bike there’s no need to worry about the frame geometry or size. As long as they have round front wheels they will fit in our racks! Like all of our Steadyrack bike wall mounts, you can swivel or pivot your bike side to side up to 160 degrees to get your bike as close to the wall as possible. The vertical mountain bike rack will also fold away when not in use for maximum storage and space efficiency. Our MTB Bike Racks can be mounted on any structurally sound wall or vertical surface, giving you peace of mind whether you’re hanging your MTB in a hallway, in a garage or on a balcony. Not suitable for bikes with permanent or fixed front fenders. Some clip-on front Fenders are OK. These are common with MTB and Fat Bikes, but you can also get them for road bikes, commuter bikes, and hybrids. Check if your bike is suitable for this rack by viewing the measurement instructions. Technical Specifications: - Dimensions: 12cm x 12cm x 80.8cm - Weight: 3.7kg - Material Zinc plated steel and plastic - Maximum Tire Width: 2.1" - 2.8" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style eBikes, MTB, eMTB, Gravel - Bikes With Fenders: No Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

Protect your ride with Electra's weather-resistant bicycle cover. One size fits most. • Outdoor-rated 150D polyester w/double polyurethane coating protects your two-wheel investment • Extra-long design fits most Electra models, as well as other models up to 75" (191cm) in length • Hook-and-loop straps keep cover in place • Reinforced lock hole • 191cm long x 79cm wide x 109mm tall

Easy storage for bikes and other items. - Heavy-duty vinyl coating to prevent scratches - Includes anchor plugs - Pair - 3 1/4" inner diameter

Easy storage for bikes and other items. - Vinyl-coated to prevent scratches - Screw thread hooks include anchor plugs - Pair - 2" inner diameter

Bike Bag Storage Bag

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

This super cool, super steady patented bikestand will hold any bike with a tire width up to 3.25". - Rubber feet keep it steady and scuff resistant - Looks great in any apartment garage or shop floor - Flatpack version is packaged in a retail box. It simply screws together and is ideal for retail sales For the shop display/welded version, see part # 196-108

This item clamps to the vertical tubing of the stand and is ideal for bicycle mechanics, both professional and amateur. This allows the bicycle brakes & gears to be adjusted whilst the rear wheel is off the ground. Ideal for BMX, racing and competition use. Simply, lift the rear of the bicycle into the frame to suspend the rear wheel.

Topeak's Dual-Touch Bike Stand is a great way to display and store your prize two-wheelers whether you park it in your living room, the garage or the office. It's built of durable and attractive aluminum, is capable of holding up to 4 bicycles with additional bike mounts (2 bike mounts included) and features a quick-release height adjustment (the stand reaches up to 10.5 feet).

Interior design reflects a homeowner’s taste, so display your precious bike on Solo Bike Holder to turn any room or garage into an art gallery. This sturdy aluminum rack provides 30 degrees of angle rotation and adjustable hooks to hang your work of art perfectly. - Attachments: Wall mount - Material: Aluminum - Max Weight Capacity: 16 kg / 35 lb - Added Features: Hook angle adjustable; Hook position adjustable - Size: 42 x 28.6 x 14.4 cm / 16.5” x 11.3” x 5.7” - Weight: 1057 grams / 2.33 lb

Compatible with wheel/tire combinations having an overall height of 3.15" (8cm) and tire width up to 2.35" (approx 6.6cm). This elegant wall mounted bike holder allows you to store one bike and swing it to either side to optimize storage space. A molded rubber bar keeps the front wheel stationary, preventing the bike bike from twisting and includes all mounting hardware plus a molded rear wheel pad to prevent tire marks on the wall. Fits standard road and mountain bikes up to 29" wheels. Not compatible with fat tire bikes. - Added Features: Rotatable front wheel, Fixed bar - Attachment: Wall mount - Limitations: Compatible with wheel/tire combinations having an overall height of 8cm (3.15") and tire width up to 2.35" - Material: Aluminum / Plastic - Max Weight Capacity: 16 kg / 35 lb - Size: 27.5 x 16 x 7.7 cm / 10.8” x 6.3” x 3” - Weight: 845 grams / 1.86 lb

A compact and economical solution to store your bike and optimize space usage. The Swing-Up EX allows you to swing your bike to either side and is compatible with wheel / tire combinations having an overall height of 3.15" (8cm) and tire width up to 2.35" (approx 6.6cm). - Attachments: Wall mount - Material: Aluminum / steel / engineering grade plastic - Max Weight Capacity: 16 kg / 35 lb - Added Features: Rotatable Front Wheel Fixed Bar - Compatibility: Compatible with wheel /tire combinations having an overall height up to 8cm (3.15”) and tire width up to 2.35” - Size: 22.7 x 7.5 x 5.3 cm / 8.9” x 2.9” x 2.1” - Weight: 950 grams / 2.09 lb

Topeak's Third Hook is the perfect addition to your TwoUp TuneUp storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!

The Thule RoundTrip Pro Storage Sleeve is a soft storage sleeve to keep the contents of your RoundTrip Pro bike case tidy when not in use.

• Wall-mount bike rack • Powder-coated finish • Vinyl-coated arms • Holds one bike by the top tube • Folding

Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). - The ES-1 adjusts from 94 to 120cm (37"-47") - Horizontal width (inside to inside): 2.23 meters (87")

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service • 470XX Machine thread including two nuts: • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length

- Oversize hooks for large MTB tires and tall aero rims - Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend - 50mm (2") of machine threading with a thread size of 10mm x 1.5mm - Black vinyl coated - Includes two nuts

• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated

• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs

- 3-Piece stainless steel pedal hook bicycle storage system - Compatible with all standard pedals: max pedal platform depth of 4.5" (114mm) - Holds bicycles up to 70lbs (32Kgs) with tires up to 3.0" (76mm) - Mounting hardware and wall plugs included

The Universal Strap quickly and easily creates a minimalist yet versatile on-the-bike storage solution capable of carrying tubes, inflators, multi-tools, and more. Featuring robust construction and a strong Velcro attachment, its textured, non-slip finish promises a firm and secure grip on everything it holds.

- Storage Hooks with machine thread and nuts & washers - Sold as a pair