Filter By:
- Bar Ends (7)
- BMX (11)
- Bottom Brackets (186)
- Brakes/Levers/Pads (419)
- Cables (99)
- Cassettes/Freewheels (110)
- Chainrings (200)
- Chains (86)
- Show More Categories
- Cranksets (193)
- Derailleurs (124)
- Forks (56)
- Groups (13)
- Handlebar Grips/Tape (170)
- Handlebars (79)
- Headsets (103)
- Pedals (196)
- Saddles (137)
- Seatposts (35)
- Shift/Brake Combinations (49)
- Shifters (97)
- Shocks (31)
- Stems (67)
- Other (1415)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$174.99
3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar. In fact, it was so good, we didn't touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T's streak as the ergo bar of choice for road cyclists.
Drop Grip: The gradual change in curvature makes the grips comfortable for hands of all sizes. The tighter top bend ensures the newest Shimano, SRAM, and Campagnolo shift/brake levers align perfectly for a very comfortable hand position on the hoods.
Center Grip: When we surveyed our customers about their desires for this new ergonomic bar, amateur and professionals alike pleaded with us not to change this area at all. It's that comfortable. So we left it alone.
- Alloy 7050
- External cable grooves
- Stem torque: 6Nm max.
- Shift/brake lever torque: 8Nm max.
- Clip-ons: Compatible
- Di2 compatibility: Not compatible
$479.99
Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort.
The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort.
The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort.
Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control.
Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger.
- Unidirectional carbon—-ultralight layup
- Internal cable channels
- Stem torque, 4-bolt: 6Nm max.
- Stem torque, 2 bolt: 8Nm max.
- Shift/brake lever torque: 8Nm max.
- Clip-ons: Not compatible (this would require a longer round center section and increase aero drag)
- Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp.
- For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top
- One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time.
- 22.2mm / 7/8 fit with angle adjustment via serrated washers
- Steel construction with ED black finish
$8.49
Gel rubber construction for the optimum balance of comfort and durability.
- Diamond pattern provides excellent grip
- 90mm length
$11.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes.
- Proportionally smaller platform size is perfect for smaller-sized feet
- Durable 7mm boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 9/16" / 1/2" axle options
- 300g per pair
- Dimensions: 93 x 87mm
$11.99
Lightweight, strong 1-piece Polypropylene thermoplastic body
- Tough 7mm boron steel axle
- Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal
- Fineline reflectors included (removable)
- 9/16" axle
- Dimensions: 110.5 x 100.5mm
- Black
- 301g per pair
$14.99
Fits Shimano / SRAM cartridge pad style carrier
- All season compound
- Length: 55mm
- Black
$14.99 - $16.99
Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.
$14.99
Durable alloy construction
- Compatible with standard saddle-clamp assemblies
- 350mm length
$14.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes.
- Durable boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 309g per pair
- 9/16" / 1/2 axle options
- Dimensions: 100 x 86mm
$19.99 - $41.99
Lightweight and strong forged alloy stem.
- Adjustable between 0 and +60
- Removable face plate for easy installation
$19.99
Gel rubber construction for excellent durability.
- Variable diamond pattern profile for maximum grip and shock absorption
- Dual lock-down clamps for maximum security
- 130mm length
- 33mm diameter
$19.99
Lightweight and strong 1-piece Polypropylene thermoplastic body with a durable ED black (Electrodeposition) aluminum cage
- Tough boron steel axle
- Built-in cage flip tab and mounting points for toe clips
- Loose ball bearing axle assembly
- Tough and durable ISO Mountain approved
- 300g per pair
- 9/16" axle
- Dimensions: 102 x 62mm
$23.99
The same great features and construction as found on our adult saddles but in a scaled down package that's perfectly sized for the stars of the future!
- Generous padding and a subtly curved neutral shape makes this saddle a great all-arounder and suitable for all applications
- Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary)
- Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 210 x W 130mm
- Weight: 253g (excl. saddle clamp)
$23.99
The same great features and construction as found on our adult saddles but in scaled-down, mid-sized package that's perfectly proportioned for youth riders.
- Generous padding and a subtly curved and contoured neutral shape makes this saddle a great all-rounder and suitable for all applications
- Raised tail and the dropped nose combine to help keep the rider in a position for optimal support and comfort
- Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary)
- Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 243 x W 130mm
- Weight: 287g (excl. saddle clamp)
$24.99
Lightweight and durable forged alloy stem.
- Removable faceplate for easy bar installation
- 30 degree rise
- Fits 25.4mm handlebars
$24.99
Durable alloy construction
- Quick and easy 1-bolt adjustment
- 400mm length
$24.99
Ergonomic shape relieves nerve pressure for optimum comfort.
- Gel rubber construction offers excellent durability
- Diamond pattern provides excellent grip
- Inner lock-down clamp for ultra quick and secure installation
$24.99
Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish.
- Tough 7mm boron steel axle
- Loose ball bearing axle assembly
- Reflectors included (removable)
- 9/16" axle
- Dimensions: 101 x 79mm
- Silver
- 368g per pair
$32.99
Lightweight and durable 2D forged-alloy stem.
- Removable faceplate for easy bar installation
- 4-bolt clamp for optimal handlebar support
- High rise for improved riding comfort
- 35 degree rise
$32.99 - $34.99
Lightweight, low-profile full aluminum flat pedal
- Barrel polished aluminum body with an ED black (Electrodeposition) or anodized silver aluminum cage
- Built-in cage flip tab and mounting points for toe clips
- Tough and durable ISO Mountain approved
- Loose ball bearing axle assembly
- Reflectors included (removable)
- 9/16" CNC machined Cro-Mo axle
- Dimensions: 97 x 63mm
$32.99
Classic/retro styled looks with distinctly modern construction and materials
- Barrel polished aluminum body with Polypropylene thermoplastic cage and a taper head 7mm Chromoly axle
- Inlaid TPE non-slip rubber tread for unsurpassed grip
- Loose ball bearing axle assembly
- Built-in reflectors included
- 335g per pair
- 9/16" axle
- Dimensions: 100 x 80mm
$33.99
The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology!
- Temperature-sensitive memory-foam padding forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort
- Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness
- Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening
- Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position
- Fits regular/narrower road & MTB saddles from approx. 130 - 160mm width
- Dimension: L 275 x 195mm
- Weight: 215g
$34.99
3D forged 6061-T6 Aluminum.
- Excellent value and performance
- A great way to try a few different stems
- Suitable for Road or XC MTB
- Sand-blasted black finish
- + / - 7 degree
- 1-1/8" steerer, 31.8 mm bar clamp
$38.99
Lightweight and strong forged alloy stem.
- Adjustable between 0 and +60
- Removable face plate for easy installation.
- 180mm quill length.
$39.99
A regular width, generously padded saddle that offers excellent comfort and support for upright riding positions with neutral riding positions with equal front/rear weight distribution (MTB, Endurance/Sportive Road, Gravel, Fitness & Urban bikes) a great all-arounder!
- Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary)
- Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road
- Generous pressure relief channel combines effectively with the base cutout to help alleviate localized pressure on the sensitive perineum area and keep the blood flowing
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 263 x W 155mm
- Weight: 350g (excl. saddle clamp)
$39.99
A wider width saddle with generous levels of padding that offers excellent comfort and support for upright riding positions with a distinct rearward weight bias (think handlebars slightly higher than the saddle) and those looking to boost comfort levels a great all-arounder!
- Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp
- Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road
- Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 228 x W 182mm
- Weight: 396g (excl. saddle clamp)
$39.99
A shallow, gently curved saddle that favors a more neutral riding position with a 50/50 weight distribution between the saddle and handlebars (handlebars at a similar/slightly lower height than the saddle).
- A great all-arounder and suitable for a bit of everything from Endurance Road/Gravel/Adventure, through to MTB and even fast urban duties effective on both dropbar and flatbar setups
- Mid-level padding can be ridden with or without a chamois/padded short
- Strategically placed base cutout allows for localized flex around the sensitive perineum area, which, when combined with the extended relief channel on the upper, create an effective combo to help to alleviate pressure and keep the blood flowing
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 277 x W 142mm
- Weight: 303g
$39.99
A long, flat profile that favors an aggressive, front-weighted riding position and more flexible riders (think road race/XC)—the racer's choice!
- Narrow nose profile and T-shape silhouette for optimal leg clearance in a forward position and a long, flat bench-like overall shape allows for easy on-bike positional changes and adjustments
- Slight kick of the tail comes into its own when the road starts to rise, giving you the perfect position to shift your weight back and use the tail to push against
- Strategically placed chevron base cutouts allow for localized flex around the sensitive perineum area, helping to alleviate pressure and keep the blood flowing while not sacrificing overall stiffness
- Low level padding - best ridden with a chamois/padded short
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 282 x W 138mm
- Weight: 304g
$39.99
Our roundest profile saddle with our thickest, plushest padding that favors a more upright, rearward weighted position (think handlebars slightly higher than the saddle) and those looking to boost comfort levels!
- Raised tail and the dropped nose combine to help keep the rider in a position for optimal support and comfort
- Like an old, familiar armchair you kind of sink into it and yet always find the same comfy spot!
- Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road
- Rearward located v-shaped pressure relief channel helps alleviate localized pressure on the sensitive perineum area and keep the blood flowing
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 275 x W 143mm
- Weight: 331g
$39.99
Marketed primarily as a women's saddle but may well find male fans also, particularly of the MTB variety, thanks to its neutral curved shape, reduced length and generous width.
- A rounded profile saddle with thick, plush padding that favors a more upright, rearward weighted position (think handlebars slightly higher than the saddle) and those looking to boost comfort levels!
- Plush, deep padding provides effectively counters the increased weighting with the rearward riding position, providing an optimum level of comfort and a nice buffer between the rider and road
- Rearward located v-shaped pressure relief channel combines effectively with the base cutout to help alleviate localized pressure on the sensitive perineum area and keep the blood flowing
- Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails
- Dimensions: L 255 x W 153mm
- Weight: 312g
$39.99
Classic butterfly/trekking/touring handlebars that are perfect for the cyclo-tourist looking to add comfort, efficiency, and stability to their long-distance/multi-day flatbar setups.
- Unique bend offers multiple hand positions to help add space, improve comfort, and avoid numbness, strain, pain, and discomfort that can sometimes be associated with riding in the same position for long durations
- Highly adjustable with four official hand positions with many more in-between possibilities to help find a position that works for you
- Also provides more cockpit space for accessories (bells, computers, mirrors, etc) and handlebar bags
- AL-6061 Plain Gauge construction creates a durable and lightweight handlebar that won't break the bank
- Grip Area: 148mm
- Weight: 500g
$44.99
The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory foam technology!
- Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort
- Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness
- Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening
- Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position
- Fits wide cruiser/comfort saddles from approx. 200 - 230mm width
- Dimension: L275 x 265mm
- Weight: 282g
$44.99
The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology!
- Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort
- Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness
- Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening
- Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position
- Fits wider fitness saddles from approx. 170 - 200mm width
- Dimension: L 260 x 245mm
- Weight: 245g
$45.99
Cutting edge NASA-derived memory foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Strategically placed base cut-away and recessed upper channel help induce flex in the base and alleviate localized pressure around the sensitive soft tissue areas
- 157mm width is suited to forward riding positions with a front bias weight distribution (Fitness/Sport)
- Construction: Nylon base w/ Hi-Ten steel rails and synthetic weatherproof upper
- Dimensions: L 260 x W 157mm
- Weight: 364g
$45.99
Cutting edge NASA-derived memory foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Strategically placed base cut-away and recessed upper channel help induce flex in the base and alleviate localized pressure around the sensitive soft tissue areas
- 175mm width is suited to more neutral riding positions with a balanced front & rear weight distribution (Hybrid/City/Trekking)
- Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper
- Dimensions: L 275 x W 175mm
- Weight: 406g
$45.99
Cutting edge NASA-derived memory foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Strategically placed base cut-away and recessed upper channel help induce flex in the base and alleviate localized pressure around the sensitive soft tissue areas
- 190mm width is suited to Amsterdam-style riding positions with a distinctly upright, rearward weight bias position (Cruiser/Comfort/Town)
- Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper
- Dimensions: L 266 x W 190mm
- Weight: 432g
$54.99
Reduced weight and improved looks over traditional adjustable stems.
- Provides 6 different angles by using the supplied shims and flipping the stem (+16, +12, +8, -8, -12, -16)
- 172g 100mm length with one shim and top cap
- Stylish bead blast black finish
- 1-1/8 steerer, 31.8mm bar clamp
$59.99
Cutting edge NASA-derived memory foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form whilst the sit bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Ergo cut-out completely removes all material around the soft tissue area to help alleviate localized pressure and reduce pain and numbness for both male and female riders alike.
- 143mm width is suited to slightly more aggressive riding positions a forward/front weight bias (Road/XC).
- Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper
- Dimensions: L 272 x W 142mm
- Weight: 312g
$59.99
Cutting edge NASA-derived memory-foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Ergo cut-out completely removes all material around the soft tissue area to help alleviate localized pressure and reduce pain and numbness for both male and female riders alike.
- 175mm width is suited to more neutral riding positions with a balanced front & rear weight distribution (Hybrid/City/Trekking)
- Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper
- Dimensions: L 275 x W 175mm
- Weight: 410g
$59.99
Cutting edge NASA-derived memory-foam technology combines with a modern, ergonomic design for the ultimate in saddle fit and comfort!
- Comfort Plus temperature-sensitive memory-foam upper inserts adapt perfectly to your body form while the sit-bone-positioned low-density base inserts form an effective barrier between surface and rider, dissipating shocks and reducing peak pressure.
- Ergo cut-out completely removes all material around the soft tissue area to help alleviate localized pressure and reduce pain and numbness for both male and female riders alike.
- 190mm width is suited to Amsterdam-style riding positions with a distinctly upright, rearward weight bias position (Cruiser/Comfort/Town)
- Construction: Nylon base w/ Hi-Ten steel rails & synthetic weatherproof upper
- Dimensions: L 265 x W 190mm
- Weight: 436g
$69.99
Versatile multi-function hybrid pedal with a clipless interface on one side and a conventional flat pedal on the other.
- Barrel polished aluminum body with an ED black (Electrodeposition) cage and CNC machined Chromoly axle
- Single release cleats with 4deg float included (as per Shimano SH51)
- Clipless interface 100% compatible with Shimano SPD cleats
- Adjustable spring tension for fine tuning clipless entry/release (80~140kgf/cm )
- Reflectors included (removable)
- 460g per pair
- 9/16 axle
- Dimensions: 103 x 63mm
$42.50
This custom-made Dropper Post Adapter allows Backcountry Saddle Packs to be used on mountain bike dropper seatposts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag.
Comes with a choice of shims for dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the adapter is also compatible with any bag that uses a 25mm seat post strap (or smaller).
- Designed to work with MTB dropper posts with a 25mm or 26mm upper section diameter
- Injection moulded glass-reinforced nylon for durability
- Silicone shim for a secure fit
- 4.5 x 4.8 x 3.5cm
- 53g
$6.00
Disc Brake Adapters
$9.00
- Replacement barrel adjuster for FR5 and SD7 levers
- Includes one pair
$11.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$13.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$14.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$21.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$25.99
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$26.99 - $39.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$31.99 - $43.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$33.00 - $39.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$34.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
Page 1 of 64
Next page