Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

OneUp Components Axle (Front)
$39.00 - $40.00
When top EWS Pro Riders ask you to develop a stiffer more durable fork axle, you listen. The stock 15mm axles and other lightweight aftermarket options were simply not tough enough for their race bikes. We don't quite ride at the pace of an EWS Pro, but we loved the simplicity and clean look of the axle so we made them available to buy. Axle F is 98% stronger and stiffer than a stock 15mm axle, yet still 20g lighter than a QR. We've replaced the QR lever with a simple 6mm hex. If you already carry the EDC multitool with you, there's no need for the heavy and bulky QR lever. FEATURES 98% Stiffer and stronger than stock 15mm QR thru axle 20g Lighter than stock QR thru axle Low profile hex head won't get caught on trailside obstacles. COMPATIBILITY For Fox and RockShox 15mm axle forks (Boost and Non Boost) NOT compatible with RockShox RS-1 fork or Fox 36 Pinch Bolt Style (2016 and older) NOT compatible with floating thru axles from 2021 Fox 36, 38 or 40
OneUp Components Axle (Rear)
$52.00
Using a solid 7075-T6 rod rather than a hollow tube makes this the strongest possible rear axle design while still being lighter than a stock 12mm thru axle with integrated lever. If you already carry the EDC multitool with you, there's no need for the heavy integrated lever which can snag on trail-side obstacles. Add one of our coloured cap kits to match your Axle R to your bike. FEATURES Lighter than stock 12mm thru axles with integrated lever or QR 7075-T6 Solid rod design for maximum stiffness and strength Low profile head won't get caught on trail-side obstacles. 5mm and 6mm hex interfaces All common axle length/thread combinations covered COMPATIBILITY You need to know both your axle length and axle thread pitch to select your new OneUp axle. These are both specific to your frame. Hub spacing (e.g. 142x12) does not denote your axle size. Your axle length and pitch might be laser etched on your existing axle (e.g. 178 x 1.5). Check here first. If your axle size is not marked, check with your frame manufacturer. Axle specs are not usually listed on website specs. NOT compatible with tapered "Syntace X-12" style axles Black spacer caps included
Hope Pro 2 Evo SRAM XD Driver
$149.99
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Sturmey-Archer 7-Speed Freewheel Drum Brake Rear Hub
$100.00
- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$150.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$60.50
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti 9mm Thru Axle Hub Kit
$33.54
The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$34.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$40.25
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Stan's NoTubes 3.30HD 12 x 142mm Hub Kit
$39.08
Stan's 3.30HD 12 x 142mm Hub Kit converts Stan's 3.30HD rear hubs from 12 x 135mm to 12 x 142mm.
Stan's NoTubes 3.30HD 15mm Hub Kit
$36.80
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 20mm Hub Kit
$36.80
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 9mm Thru Axle Hub Kit
$33.54
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD QR Hub Kit
$36.80
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD Shimano/SRAM Freehub Body
$150.00
Replacement Shimano/SRAM aluminum freehub body for Stan's NoTubes 3.30HD rear hubs.
Stan's NoTubes 3.30HD Shimano/SRAM Steel Freehub Body (9/10-speed)
$150.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
Stan's NoTubes 3.30R/3.30RTi Freehub Body
$140.00 - $150.00
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
Stan's NoTubes 3.30RD/3.30RDTi 12x142mm Thru-Axle Conversion Kit
$60.50
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$164.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30HD Hubs)
$164.00
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30Ti Hubs)
$220.00
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Shimano 105 HB-R7000 Rim Brake Front Hub
$63.80
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano Alfine Centerlock Dynamo Hub
$170.00
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Shimano Deore HB-T610 Rim Brake Front Hub
$34.50
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling
Shimano Deore M6000 Centerlock Front Hub
$34.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm
Shimano Deore XT M756 6-Bolt Disc Front Hub
$73.50
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano Deore XT M8000 Rear Hub
$159.98
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
Shimano Deore XT M8100 Front Hub
$74.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano Deore XT M8100 Straight Pull Front Hub
$89.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
Shimano Dura-Ace Track HB-7710 Low-Flange Front Hub
$238.00
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Page 1 of 3 Next page