Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Grips

Trek Kids' Single Speed Grip Set
$10.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
Trek Kids' Twist Shift Grip Set
$9.99 - $10.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes with twist shifters - Set of two grips Specifications - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
Supacaz Grizips
$24.99 - $26.99
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
Spank Spoon Grom Grips
$24.99
All the quality and performance of SPANK's SPOON grips, in a new 100mm length specifically designed for kids. One of the most common complaints of young riders is that adult grips position their hands too far from the controls, making them move their hands around while riding, or risk pinching fingers in brakes. The new SPOON Grom grips alleviate this issue, putting their hands in the right place every time, and allowing them to set up their handlebar controls just like dad! Material: Tacky rubber, alloy clamp rings Length (mm): 100 Diameter (mm): 30 Weight (g): ±95/set Features: Tailored to fit children's hands; two anodized alloy clamp rings; plastic safety end plugs; micro diamond pattern
SRAM DoubleTap Lever Hoods
$41.99 - $44.99
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.
SQlab 70X Gravity and E-Performance Grip
$41.99 $59.99 30% Off
The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend
SQlab 710 MTB Tour and Travel Grip
$46.19 $65.99 30% Off
The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker. This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 238 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend
SDG Slater Jr. Grips
$24.99 - $27.99
- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.
Renthal Lock-On Super Comfort
$41.99 $59.99 30% Off
- CNC aluminum locking collars - Different levels of grips for different uses - Grip Length: 130mm - Handlebar Diameter: 22.2mm - Outer Diameter: 30.5mm
Oury Lock-On V2 Grips
$44.99
Oury single sided V2 lock-on grips. - Flange: No - Lock On: Yes - Grip Shift Specific: No - Length: 127mm - Shape: Round - Weight: 200g
Oury Single Compound w/Flange
$22.99
Extensive material research and design testing, plus expert and carefully detailed craftsmanship, have produced the ultimate standard in grip comfort and beauty. Anti-vibration large pad design eliminates numbness and slipping for any hand size. Made in the U.S.A. - Compatible with MTB, BMX, ATV, PWC - 5" long (127 mm) - 7/8" I.D. (22.25 mm) - 1.26" O.D. (32 mm) - 5 ounces (141.5 grams)
OneUp Components Grips
$34.50
A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm
ODI Lock-Jaw Clamp Replacement Bolts
$7.99
- Enough clamp bolts for 4 clamps
ODI Lock-On Grip Clamps
$26.99
- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs
ODI Longneck ST BMX Grips
$19.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included
ODI Longneck V2.1
$41.99
- Comfort: Soft and comfy just like your favorite chair - Our newest addition to the ODI line brings a welcome facelift to our iconic Longneck Lock-On grip - Constructed of our proprietary Soft Compound TPE material and featuring our legendary Longneck Rib Pattern, these grips provide exceptional comfort for all riding conditions - The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions - We have also designed these grips to be e-bike friendly with exceptional vibration dampening with or without gloves, the new small flange to protect hands, and new soft feel end with hard plastic reinforcement to prevent grip blowout - Large outer diameter: 31.5mm
ODI Rogue Lock MTB Grips
$37.49 - $49.99
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock MTB Grips
$44.99 - $47.99
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
ODI Ruffian Lock-On Mtb Grip Core
$24.99
- Rigid plastic grip core interlocks with clamps on either end - Two sizes available: 130mm for standard, or 90mm for twist shifters - Sold as a set/pair and includes end plugs
ODI Sensus Freeride Lock-On Mtb Bonus Pack
$46.99
- Designed by Cameron Zink and manufactured using ODI's proprietary grip compounds - Aluminum clamps secure the grip on both ends using a hex wrench - 143mm length gives extra room for Freeride maneuvers - Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
ODI Soft X-Longneck Grips
$19.99
The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm
Ergon GA2
$44.99 - $47.99
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GD1 Evo Slim
$52.99
Ergon GD1 Evo slim factory grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No
Ergon GE1 Evo
$54.99 - $57.99
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g
Ergon GE1 Evo Factory
$54.99 - $59.99
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
Ergon GP1
$47.99 - $57.49
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
Ergon GP2
$64.99 - $72.49
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
Ergon GP3
$77.99 - $87.49
One of the best selling Ergon grips, with their 3-finger and installation-friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.
Electra Townie Kraton Ergo Long Grip Set
$25.99 - $39.99
Get a grip…or two! Grips are a key point of contact between you and your bike. - Electra lifestyle grips help to personalize your ride - Durable Kraton lock-on grips featuring ergonomic shape for comfort and support - Matching saddle available for some models - Set of two grips - Length: 130/130mm - Diameter: 22.2mm - Material: Kraton - Weight: 172g
ESI Chunky Grips
$29.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Page 1 of 7 Next page