Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

Jagwire M10 Adjusting Barrel
$2.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire Pro Dropper Cable Kit
$26.99
Dropper seatposts are quickly becoming standard equipment on mountain bikes across the globe, and for good reason. While most droppers use traditional shift cables and housing, the Jagwire Pro Dropper Kit is the first cable and housing system designed from the ground up to ensure they work as well as possible. The included dropper-specific 0.8mm Pro Polished stainless inner cable interfaces seamlessly with remote levers and actuator arms to provide effortless cable movement. And the innovative FLEX-SL housing is more flexible than standard shift housing, allowing for easier installation with internally-routed seatposts and providing smoother cable movement. With all needed parts included, Pro Dropper Kits are simple to install. - Pro Polished cables combined with improved Slick-Lube housing liners offer enhanced remote lever feel and long-lasting performance - Kits include all the parts and enough housing to install with either internally or externally routed seatposts - Includes heat-shrink shims for use at the cable clamp to ensure compatibility with most cable-actuated seatposts and remote levers - Flexible housing construction improves performance with internal routing and tight housing bends - 0.8mm cable and FLEX-SL housing are for use only with dropper seatposts What's Included: - 1x 1700mm FLEX-SL Dropper Housing - 1x 2000mm Pro Polished Dropper Inner Cable - 2x Sealed Alloy End Caps - 2x Lined Alloy End Caps - 1x Heat-Shrink Shim - 1x Cable Tip - 1x 5G Tube Top - 1x Rotating Hook
Jagwire Pro Slick Polished Stainless Brake Cable
$9.99 - $18.01
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Pro Slick Polished Stainless Shift Cable
$9.99 - $17.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Sport Direct Rocket II Cable Tension Adjusters
$13.99
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm
Jagwire Sport Slick Stainless Road Brake Cable
$4.89 - $10.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Jagwire Steel Frame Mount Index Adjusting Barrel
$2.99
Frame mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10
Wheels Manufacturing Inc. Brass Cable Housing Ferrules: Bottle of 50
$36.49
- Precision-machined cable ferrules for improved braking and shifting performance. - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 50-count bottle
Wheels Manufacturing Inc. Silver Aluminum Cable Housing Ferrules: Bottle of 100
$67.18
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle
Vision Aero/Reverse Brake Lever Specific Brake Cable
$5.99
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
Shimano 5mm Brake And Derailleur Casing
$152.00
- Shimano brand casing with internal lining for optimized response - Brake: offered in a stiffer (M-System) for MTB, or a more pliable (SLR) version for road applications (can be used for either discipline depending on user preference) - Derailleur: (SIS-SP41) compressionless design pre-lubricated with silicon grease to decrease cable friction
Shimano Dura-Ace Polymer-Coated Road Brake Cable Set
$68.25
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
Shimano PTFE Road Brake Cable Set
$64.90
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
Shimano SP40 Nosed Cap And Raincoat Kit
$19.25
- Wet or muddy condition cable sealing solution - 4/6mm
Shimano XTR SP41 Polymer-Coated Derailleur Cable Set
$75.60
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
SRAM 4mm Derailleur Casing
$130.00
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
SRAM Guide Hydraulic Line Kit
$50.75
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
SRAM Rim Brake Hydraulic Line Kit
$66.00
SRAM's Rim Brake Hydraulic Line Kit is a replacement hose kit for all road hydraulic rim brakes. - Compatible with SRAM road hydraulic rim brakes - Length: 2000mm
SRAM Road Disc Brake Hydraulic Line Kit
$76.90 - $77.68
Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes
SRAM Road Hydraulic Brake Hose Kit
$59.99
Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black
SRAM SlickWire MTB Brake Cable Kit 5mm
$63.25
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
SRAM SlickWire Road Brake Cable Kit 5mm
$63.25
SRAM's SlickWire Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors. - Weight: 99 grams (pair)
SRAM SlickWire XL Road Brake Cable Kit 5mm
$65.63
SRAM's SlickWire XL Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent 1.6mm coated cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
SRAM SlickWire XL Road Brake Cable Kit 5mm
$78.75
- Road bike-specific 1.6mm extra-long coated stainless cable - Front and rear brake - Disc compatible - 5mm compression-free reinforced housing with lubricated liner - Kit includes 2 frame protectors and short-nosed aluminum ferrules
SRAM Slickwire Stainless PTFE Coated Brake Cable
$21.31 - $24.06
Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Diameter: 1.6mm - Double Ended: No
SRAM Stainless Road Brake Cable
$9.00 - $17.19
Stainless steel cables are extruded to provide a smooth, low-friction surface.
RockShox Reverb Cable/Hose Line Guide
$16.49
RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.
Kink 1-Piece Brake Cable
$34.50
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz
Kink Desist Front Brake/Dual Cable Kit
$19.99
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.
Kink Linear Brake Cable
$25.30
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz
Page 1 of 4 Next page