$0.10 - $67.99
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$14.99 - $34.99
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$22.99 - $64.99
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$10.99 - $31.99
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$12.99 - $39.99
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$15.99 - $55.99
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum
Miracle Red is a 3-in-1 bio-degreaser, hand cleaner and stain remover. - 100% natural, no citrus, pumice or petroleum products - This product will float the grease out of finger prints and will remove grease from white T- shirts like a miracle
$11.99 - $25.99
- Premium red formula all-purpose bicycle grease
- 15mm wrench for installation and removal of pedals with wrench flats on axle - Dual compound handle for extra grip and comfort - Angled for safe and easy use
• Set of freewheel-cleaner and -scrubber • Strong and durable Nylon bristels
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
The 4th edition of the Big Blue Book of Bicycle Repair is updated with the latest information, procedures and techniques and covers everything from minor adjustments to complete overhauls. The BBB-4 features clear, step-by-step instructions, high quality color photos and useful charts and graphs to thoroughly explain and demonstrate hundreds of repairs. Written by one of the world’s leading authorities on bicycle repair and maintenance, Park Tool Director of Education, Calvin Jones, the Big Blue Book is the perfect reference guide for nearly any level mechanic and every bike. New information and topics included in the BBB 4th edition: - 12-speed and 1x drivetrains - Tubeless tires - Disc brakes - Electronic shifting - New wheel building content - Updated headset and bottom bracket standards - Updated torque specifications - Updated troubleshooting tables
The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT-fluid-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount - Housed in a rugged reusable case - Machined stainless steel and 7075 aluminum fittings to service SRAM, Hayes, Formula, Hope and other brands of DOT-fluid-based hydraulic brake systems - Replacement parts available - Brake fluid not included
The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral-oil-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and for the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks, bleed funnel and a unique attachable syringe mount - Housed in a rugged reusable case - Machined 7075 aluminum fittings to service Shimano, Magura, Clarks, Promax, Tektro, TRP and other brands of mineral-oil-based hydraulic brake systems - Replacement parts available - Brake fluid not included
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Suspension maintenance and tuning require tools designed for a precise fit. The SKT-6 from Park Tools is a shop-quality set of six flat-faced sockets designed for use with common suspension fork fittings. Ideal for use with Park Tool Torque Wrenches, the 3/8-inch drive sockets are forged from tough chrome vanadium steel and chrome plated for lasting durability. - 24, 26, 27, 28, 30, 32mm flat-faced sockets - All sockets are 3/8" drive - Note: 27mm socket is tapered for better access on Suntour suspension forks
Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!
This 7mm and 9mm flare wrench is used to open and close compression nuts/fittings on hydraulic systems. The MWF-2 features angled heads for easy access and unique, semi-box openings to reduce the risk of damage to compression fittings.
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
A workstand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.2 Deluxe Home Mechanic Repair Stand was designed and built using our 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.2 also folds easily for transport or storage. - World famous Park Tool cam actuated, micro adjustable clamp that allows quick entry and exit and fits 1- to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material - All steel structure for maximum stiffness and durability - Teardrop shaped tubing adds strength and ensures perfect positioning during use and folding - Folds quickly, easily and compactly for storage using aluminum quick release mechanisms and strong tubular support braces - Quick release height adjustment from 39- to 57-inches (99cm–145cm) - Durable textured powder coat finish - Super strong glass filled nylon composite fittings and top tube internals creating smooth rotation and secure positioning - Includes height adjustable compact tray to hold small parts, a few tools and the PTH-1 Paper Towel Holder (optional accessory)
A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use. - Proven chain scrubbing technology leaves chains sparkling clean - Durable A380 aluminum die cast case and removable handle - Dual-sided sponges and wicking pads to help reduce drips - Rotating brushes clean on all four sides of every link - Brush and sponge cartridge quickly and easily clicks in and out (RBS-25) - Locking cover with stainless steel hinge pins - Choose drip or immersion fluid application methods - 100% serviceable
$13.79 - $13.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Page 1 of 18 Next page