A durable Tubeless Ready mountain wheel with Rapid Drive 54 hub. - Rapid Drive 54 hub efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - 142x12 and 100x15 thru-axle spacing is convertible to 135x5 and 100x5 QR - Ultra-durable rim with 29mm internal, 34mm external width, 28-hole front/rear - Does not include skewer, reflector, rim strip, valve, or owner's manual

Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve

A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing. - Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction - Asymmetric rims w/ offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - high-pressure rim tape included (non-tubeless) - Tubeless compatible - Weight: Front - 1076g, Rear: 1177g

A tough, tubeless-compatible 27.5-inch disc wheel built around Center Lock hubs but shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 956g

Zipp's 3ZERO MOTO carbon 27.5 enduro/trail wheel is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

Zipp's 3ZERO MOTO carbon 27.5 enduro/trail wheel is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

- Affordable and reliable disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience - 36 stainless steel spokes and brass nipples for improved durability - TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes.

- Evo Tour 19 27.5" double wall rim—Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes—Silver - Freewheel

Rims: EVO JP95 27.5" - ETRTO 584-94 - Inner width: 94mm - Disc Brake Only - Drilled for Schrader valve - 32 holes Front hub: Novatec D201SB - 15x150mm (Axle not included) - 6-Bolt Disc Mount - Sealed cartridge bearings (x2) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: EVO JP95 27.5" - ETRTO 584-94 - Inner width: 94mm - Disc Brake Only - Drilled for Schrader valve - 32 holes Rear hub: Novatec D202SB - 12x197mm (Axle not included) - 6-Bolt Disc Mount - Sealed cartridge bearings (x5) - Compatible with 8-11 speed MTB (12 speed HG with 1.85mm spacer, not included) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01): Alloy, Disc and Rim brake compatible, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Sram 900 Boost - 15x110mm Thru-Axle (Axle not included) - 6 Bolt Disc Mount - Sealed cartridge bearings

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT410-B (Boost, MS) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs: FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT200-B (Black), Shimano logo, M9x141mm BOOST141 - HG Freehub compatible with 8 - 10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Quick Release binder included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT200 (Black), Shimano logo, M9x100mm - Center Lock disc mount - Adjustable bearings - Quick Release binder included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT400 (Black), Shimano logo, 15mm E-THRU, O.L.D. 100mm - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (incl.) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: - Shimano HB-MT200, M9x100mm - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-02): - Shimano FH-MT200-B, M9x141mm - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-03): - Shimano FH-M4050, M9x135 - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: - Shimano HB-M525, M9x100mm - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included Rear hub: - Shimano FH-M525, M10x135mm - HG Freehub compatible with 8 - 10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples