Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$16.00
- Christophe Vintage leather strap
- Celebrating 130 years of history
- 370mm long
- Metal buckle
$33.99
- Christophe Vintage toe-clip
- Celebrating 130 years of history
- Steel cage
- Chrome finish
- 01: S/M; -02: L/XL
$32.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$35.00
Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System
In the box
- Y-shaped charging cable
- Charging clips (x2)"
$59.99
- Compatible with all Shimano SPD type pedals
- SPD cleat design to be assembled on LOOK style shoes
$19.99
$39.99
50% Off
$31.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.
$31.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$31.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$31.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$31.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$31.00
- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12
$46.00
- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws
$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip
$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer
$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included
$49.99
- Crank boots compatible axle rebuild kits for SPIKE and OOZY pedals (with bright green friction seals), produced in 2015 or later. Bearings must be purchased separately.
- Crank boots compatible axle
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs
$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals.
- Pins available separately
$54.99
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals
- 1 set L&R axle
- 2pcs IGUS bushing
- 2pcs O-ring
- 2pcs dust cap
- 2pcs stainless shim washer
- 2pcs silicone friction seal
- 2pcs lock nut
$25.99
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
$22.00
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
$22.00
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS:
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
- 2 INNER CAPS
- 2 END CAPS
$26.99
PIN KIT FOR OUR COMPOSITE PEDALS
KIT CONTAINS:
- 40 THREADED M3x10mm SOCKET HEAD PINS
- 40 NYLOCK NUTS
$28.99
HEIGHT ADJUSTMENT WASHERS AND PINS FOR OUR ALUMINUM PEDALS
KIT CONTAINS
- 40 - HEXIGONAL TIPPED M4 THREADED SOCKET HEAD PINS
- 40 - 0.8mm THICK HEIGHT ADJUSTMENT WASHERS
$38.99
Everything you need to fully rebuild your OneUp Aluminum Pedals.
Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly.
KIT CONTAINS
- 2 LARGE OUTER BEARINGS
- 2 BRASS BUSHINGS
- 2 OUTER SEALS
- 2 FLANGE WASHERS
- LH AND RH AXLE BOLTS
- 2 AXLE O-RINGS
- LH AND RH BEARING NUTS
$28.00
Replacement pins for our Daemon pedals:
- 5mm long
- Made with 316 stainless steel
- Precision CNC Machined in Whistler, B.C.
- Sold in packs of 10
$71.00
Our rebuild kit keeps your Daemon pedals running like new.
Includes:
- Nitrox-coated axles (left and right) with nuts (x2)
- Stainless steel, sealed Enduro cartridge bearings (x4)
- Igus bushings (x2)
$19.99
$39.99
50% Off
Page 1 of 3
Next page