- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Shimano, SP41, 4mm Shifter housing, 50m

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Brass compression olive for Hope hydraulic disc brakes.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

2x steel grip collar bolts For use with: - The Bartender Pro Grip - The Bartender Grip

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

An M6 bolt for fitting Mudhugger EVO Bolt-On to Rockshox Recon Gold & Silver 35 forks. Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. NOTE: some Recon Gold/Silver do NOT have bolt holes; please check your forks before ordering. When fitting to your forks use the angle adjust shim provided in the default Bolt-On packaging to raise the tail end of the fender to the correct angle. Kit includes: - 1x M6 bolt, 10mm long

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

5mm Spacers for internal travel adjust of REVIVE and REVIVE MAX dropper posts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- HexAir Technology is a breakthrough in saddle comfort featuring patent pending hexagonal, air pockets and specially treated outer layer to provide a non-stick surface - Easily stretches over most racing and touring saddles - Silicone with a hexagonal air pocket grid design is fully waterproof and UV resistant - Available in two sizes for racing and touring saddles - -01: Racing saddles, 5.5" wide; -02: Comfort/Touring saddles, 6.6" wide

FSA Mega Exo Small Parts.

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Our mountain rim brake pads are available both with a threaded or smooth post.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Flat head screws from Wheels Manufacturing.

Bulk packaged, corrosion resistant stainless steel fasteners.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Flat head screws from Wheels Manufacturing.

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

73mm shell width only BSA/'British' thread pitch (1.37 in x 24 TPI) 2-piece sealed cartridge bearing construction w/ steel shell, axle & cups JIS standard taper Weight: 338g (113mm)

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP