Protective/Armor

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside

Lightweight and flexible padding that is barely noticeable - ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact-absorbing VPD compound - Reinforced stretch fabric - Elastic strap for a comfortable fit - Neoprene anti-slip on the inside - Designed with a low profile

The POC Joint VPD System Knee is a lightweight, highly flexible protector that works with the body in all riding positions, warming to and moving as one with the body. In a fall, the material hardens, absorbing the force from any impact. The knee protector conforms to the toughest EN 1621-1 Level 2 standards and features a highly efficient ventilation system to stop the wearer overheating. The outer fabric is constructed from high-tenacity polyamide yarns creating a low friction surface with high abrasion resistance. - Extremely flexible and light VPD knee pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction, polyamide construction with high abrasion resistance

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact certified profile - New, wider, silicone printed, and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Weight: 350g (pair)

The 3DF 6.0 3DF elbow pads feature the latest tech from Leatt. This hard-shell slider paired with 3DF impact absorbing protector works like a charm and gives you the best of two worlds—soft and sliding! With ventilated, perforated sleeves with silicone grip and an integrated silicone-coated X-strap, these guards do not slip down! It also offers a great fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 14 points in the Leatt protection rating system. - Soft elbow guard with co-molded hard-shell sliders - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-odor MoistureCool and AirMesh wicking fabrics - Silicone printed elbow grip - Pre-curved 3D design for optimal fit - Weight: from 320g (0.71lbs) pair

Ultra-slim and soft-impact gel protector. A high-tech elbow protection in a minimalistic, comfortable fit with CE certification, this elbow guard has a lightweight construction which can flex and fit for premium comfort. The AirFlex impact gel is the latest technology in protection. Single sizing and silicone grip panels give you the famous Leatt non-slip fit. - New super-slim and lightweight AirFlex gel impact protection - Our 3D design ensures a great fit that is very comfortable - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone printed, cupped elbow grip - Total Leatt protection score of 11 points - CE tested and certified as impact protection: Elbow EN1621-1 - Weight: from 240g (0.53lbs) pair

A super slim elbow guard with CE impact certification, the ReaFlex Ultralite is engineered for maximum protection and comfort. Featuring ReaFlex impact gel, the elbow guard is soft and flexible but extremely tough under impact. The ultralight AirMesh sock ensures comfort even on all-day rides, and silicone printed cuffs keep the elbow guard in place. - Total Leatt® protection score of 10 points - New ultralight sock for improved fit and premium comfort - AirMesh ventilation, and moisture wicking fabric ideal for longer rides and warmer climates. - Super slim and lightweight, ReaFlex impact gel protection - CE tested and certified as impact protection: - Elbow EN1621-1 Level 1 - Single sizing for perfect fit - Silicone printed, non-slip cuffs - All protection materials perforated for superior ventilation - Weight: TBA - Sizing: S – M – L – XL - XXL - Plastic-free packaging

The 3DF 5.0 Knee Guard EVO offers the ultimate in knee protection. Constructed with Deflextion Technology, the knee guard is ultra lightweight and ultra durable. The 4-way stretch material across the knee is CE certified. A moisture-wicking, perforated Neoprene sleeve guarantees excellent ventilation. Premium performance doesn’t compromise on comfort - with a pre-curved design, the 3DF 5.0 EVO can easily be worn all day long. - Total Leatt® protection score of 13 points - NEW more ventilated 3DF soft impact - NEW single sizing for super fit - NEW improved thinner chassis fabric - NEW Deflextion™ ultra durable shell material - Slim, CE impact certified knee pad profile - CE tested and certified as impact protection: Knee EN1621-1 Level 1 - Premium comfort using MoistureCool and AirMesh wicking fabrics - Pre-curved design for premium comfort and function when riding - New ventilated Neoprene sleeve - Anti-slip calf band - Abrasion resistant outer layer for durability - Silicone printed and adjustable non-slip leg straps - All protection materials perforated for ventilation - Weight: 380g (0,8 lbs) pair - Sizing: S –M –L –XL -XXL - Plastic-free packaging

Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

ULTRA-LITE AND ULTRA SLIM IMPACT GEL PROTECTOR Engineered for maximum pedal efficiency and comfort. Minimalistic, comfortable, ergonomic fit and uncompromised CE certified impact protection. The ultra-lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. The extended leg sock offers great support high on the thigh, relieving pressure from the calf. This knee guard meets all our design criteria with premium mesh and ventilated materials. The ReaFlex impact gel pad fits into a mesh pocket with an abrasion resistant patch over the knee. Once you put these on, you will see what we mean! Has a Leatt protection score of 10 out 25.

THE BIG DOG FOR BIGGER DAYS The new LOBO KNEE PAD was designed for going big all day. Performance-minded patterns let you slide it on in the parking lot and not take it off until after the last lap. The D3O™ LP1 insert offers a high level of impact protection while being the most comfortable at all temperatures. Perforations through the suede microfiber promote air circulation to keep you riding dry. A high Abrasion CAP armor print protects Renew Series materials including an Evo Grip Cuff, hi-vent stretch mesh back panel, and Italian stretch woven compression sleeve that holds everything in place securely. Send it in confidence with the Lobo Knee Pad. Features: · D3O™ LP1 · EN1621 Level 1 Impact Certified · Removable insert Fabric: · Renew Series Italian made stretch woven compression sleeve · Renew Series Evo Grip Cuff · Renew Series hi-vent stretch mesh back panel · High abrasion CAP armor print · Renew Series Ax Suede™ Stretch microfiber knee zone · Silicone gripper at cuff · Internal pocket for insert removal

Our New Youth Pro-X4 Knee Guards boasts a new SmartFlex pre-curved padding for extended coverage and an ergonomic, comfortable ride every time. These CE-1621-1 Level 1 certified guards have innovative heat management and ventilation systems to keep you cool and dry on the trails. Additional padding and as secure fit provide ultimate comfort and easy on-off, and throw it in the washing machine when you're done for the day.

Chromag simply wants to produce things that the staff want to use, day in, day out. The majority of the protection is located up front provided by RHEON™ and encased in an aramid skin to provide resistance to abrasions and tears. Additional lateral foam inserts keep the pad low-profile and allow for unrestricted movement, without bumping the cost sky high. The RHEON™ insert is located on an airprene backing to provide structure, and also moderate temperatures on those all day epics. The calf gusset is designed to keep the pad in place, combined with the generous silicone band around the top, and the upper stretch mesh which allows movement of your leg while keeping everything where it needs to be.

Our super-light Kids Transition pads are designed for the little rippers out there that ride scoot or pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ Kids Elbow Guard, iXS introduces product properties like exchangeable padding and next-generation, structurally improved AeroMesh. offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Youth sizing

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicone Stopper - En1621-1:2012 Certified - Youth sizing

The Carve models manage without hard shells and are, therefore, light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept, provide high impact absorption and protection. With the Carve Evo+, we introduce product properties like exchangeable padding and the newest generation of structurally improved AeroMesh, offering a higher level of comfort and structural strength. - Xmatter protection foam (exchangeable) - AeroMesh, light, moisture wicking, breathable, anti-bacterial, added structural strength, high level of comfort - LoopLock closings - Silicone gripper - Certifications: EN1621-1:2012, EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.) - Material composition: 40% Polyester, 25% PU, 15% Nylon, 15% Kevlar, 5% EVA

The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength. - Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 certified

The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength. - Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 certified

If you’re pushing your limits, you’re going to take risks. When things get a little too rowdy, make sure your legs are protected with iXS’s Cleaver Knee/Shin Guards. Specially designed for gravity applications, the Cleaver iss are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh construction is a lightweight, extremely breathable material that helps keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial, so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Highlights: • ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic. • SqueezeBox: an articulating joint behind the knee for a great fit with max comfort while pedaling. • NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees. •KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact. •SideTap & Skid Protection: integrated, lateral padding for protection against grazes with trail obstacles.

With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

With the Flow Evo+ knee guard, iXS provides super thin, light and comfortable knee protectors. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

The Flow Kids Upper Body Protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively. Key technologies - X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties. -FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching. - Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking. - Youth sizing

With the Flow ZIP knee guard, iXS provides super thin, light and comfortable knee protectors. According to its name the Flow ZIP features an elastic zip FlexZip which simplifies putting them on and off. Developed with mountain bike legend Hans Rey, pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow ZIP iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Flexzip, Stretchable Zipper - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

iXS’s Hack EVO Elbow Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for your trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding. Qmatter is a lightweight, supple foam that allows maximum mobility and disperses shock forces during impact. Other highlights: •NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees •Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions •Wide Velcro straps provide maximum security and comfort to keep pads in place •Silicone strips inside prevent slippage for a secure fit while pedaling and descending

iXS’s Hack EVO Kids Elbow Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for youth trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding with its lightweight, supple foam that allows maximum mobility and disperses shock forces during impact. Other highlights: - NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees - Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions - Wide Velcro straps provide maximum security and comfort to keep pads in place - Silicone strips inside prevent slippage for a secure fit while pedaling and descending - Youth sizing

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

The Trigger models manage without hard shells and are therefore light and with its asymmetrical design extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Trigger we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Asymmetrical Design, Left And Right Specifically And Individually Formed For Improved Comfort. - Anatomically Formed For Improved Comfort, Flexibility And Function - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

The Trigger knee guards are the best option when looking for a light yet technically advanced form of protection that still requires more demanding use from riding. Developed for rough terrain, the Trigger knee guards comfortable weight comes from the integated Xmatter padding that was developed to deliver high impact absorption and protection in a lightweight package. The asymmetrical design promotes ergonomic comfort and flexibility while also preventing slippage during pedalling. Moisture wicking, antibacterial properties of the AeroMesh promotes high breathability and all-day riding comfort. These guards allow you to remove the padding should you need to throw the sleeve in the wash or replace padding which has lost its structural integrity. - Ergonomically formed Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - Asymmetrical design - Anatomically formed for improved comfort, flexibility and function - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 (L1)

Xmatter elbow pad, EN1621-1:2012 Material composition: 100% PU Conformity: - EN1621-1:2012 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

Xmatter knee pad A-Type short, EN1621-1:2012 - Material composition: 100% PU Conformity: - EN1621-2:2014 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

Xmatter asymmetrical knee pad, B-Type long, EN1621-1:2012 - Material composition: 100% PU Conformity: - EN1621-1:2012 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

Mix it up or match your riding kit. Customize your braces with a detachable cover strap for your 2.0 ankle braces. A new pair of cover straps also can make a worn pair of braces feel like new!

Born from the bmx and mountain biking world, the Space Brace ankle brace offers incredible support for all leisure and sport activities including snowboarding, wakeboarding, skateboarding, football, hockey, hiking and many more!

Dennis Enarson is no stranger to the importance of protective gear. For a long time, the world renowned professional BMX rider and X Games medalist has been seeking out a knee pad to meet his design and functional needs. With the help and input of Dennis, we decided to bring his dream knee pads to life! Impact cushioning gel in the pads mean no hard plastic pieces are needed. Dennis Enarson Space Brace knee pads protect and give users the confidence to land on their knees out of a bail without getting cut up or bruised. Space Brace’s unique neoprene and compression material not only allow the Knee Pads to help improve blood flow and reduce swelling, but also have a strapless, no slip design with minimal bunching on the back of the knee. Style has always been important for Dennis. Our non bulky, no hard plastic, low profile design allow users to wear the knee pads under fitted jeans without compromising style!

SUPPORTS MOVEMENT REDUCES JOINT SEPARATION - Decreases the frequency and severity of dislocations, separations, and various other shoulder issues. - Helps guide and center the shoulder into the socket, improving stability and reducing pain, while maintaining natural movement and mobility. - Offers support and stability with personalized support preference. The tighter the straps, the more support brace offers. Shoulder Brace Features: - TITAN Gel Support System insert applies pressure and massage to shoulder tendons. - BreathSaver Smart Strap System fastens across the back and above the hips to provide uninhibited respiration. - Soft knit fabric with a high elasticity for an optimal fit and feel. - Medically engineered compression helps improve circulation and blood flow in shoulder - Reinforced velcro on straps and TITAN Gel Support System. - Double stitched at stress points.

Wrist Brace Features: - One Size Fits All – Fits left or right wrist - Full wrist support with unobstructed natural grip - Made with lightweight, breathable materials - Unisex

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (Kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technical back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

- Made for the e-xtreme - Hard shell gives protection and ability to slide on hard surfaces - Top and bottom adjustable hook and look fit-strap for customized comfort and security - Rugged Armortex (kevlar blend material) pads covering flights abrasion - Zipper for easy on and off - Active Airflow: 4 layer ventilation system - Technial back mesh for breathability - CE 1621-1 certified to ensure outstanding protection

Ready to race or tackle all-season sports with the all-new EX-1 Short Liners! These base-layer, padded compression shorts provide riders with the flexibility needed to give it their all, while protecting the hips and tailbone!

- Ventilated back pad is flexible and removable. Layers of SmartFlex and multidensity foam offer exceptional comfort and protection - SmartFlex Stretch padding on shoulder protects during crashes and falls - SmartFlex Stretch padding on chest for protection against falls and roost debris - CE 1621-2 certification - Full-length front locking zipper with reinforced seams - Breathable, moisture wicking mesh fabric offers comfort, exceptional performance, fit and long-lasting durability

Improving on our best selling Pro-Rugged Knee-Shin Guards, the Pro-Rugged 2 Knee-Shin Guards bring upgrades and enhancements in style, fit and protection. With 3 layers of protection; DuraTx outer layer for durability and tearing/catching resistance, G-Form's body-mapped, impact-absorbing SmartFlex Padding, and soft inner foam and silicone grippers for a secure, comfortable fit. Pro-Rugged 2 Knee-Shin Guards are ready to protect riders from whatever the mountain can bring.

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

These body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact. - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Our New X4 Elbow Guards are designed with riders wants and needs in mind. We have introduced a new pre-curved shell, new ventilation/breathability systems, and gripping design to provide the ultimate protection and comfort while you are out on your ride.

- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat

Go Next Level with the Terra Knee + Elbow Guards, G-Form's first product using all-new eco-friendly technology; RE ZRO. RE ZRO is G-Form's all-new impact protection that is fully biodegradable* and 100% recyclable**. Terra's RE ZRO pad is pre-curved, thin, flexible, strong, and certified at CE EN1621-1 Level 1 protection. The sleeve features an abrasion-resistant covering, mesh cutouts for breathability, and a wide, silicone gripper to keep the guards in place. The removable RE ZRO pad is hand-washable, while the fabric sleeve is machine-washable. G-Form products powered by RE ZRO are designed with both the rider and the environment in mind, so you can Go Next Level!

Go Next Level with the Terra Knee + Elbow Guards, G-Form's first product using all-new eco-friendly technology; RE ZRO. RE ZRO is G-Form's all-new impact protection that is fully biodegradable* and 100% recyclable**. Terra's RE ZRO pad is pre-curved, thin, flexible, strong, and certified at CE EN1621-1 Level 1 protection. The sleeve features an abrasion-resistant covering, mesh cutouts for breathability, and a wide, silicone gripper to keep the guards in place. The removable RE ZRO pad is hand-washable, while the fabric sleeve is machine-washable. G-Form products powered by RE ZRO are designed with both the rider and the environment in mind, so you can Go Next Level!

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - 4+ hour chamois to remain chafe-free (Not included on youth) - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Women's short liner has high waist, yoga-style waistband, and longer inseam for a more comfortable fit - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Ready to race or tackle all-season sports with the EX-1 MTB Short Liner?! These base-layer, padded compression shorts provide riders with the flexibility needed to give it their all, while protecting the hips and tailbone!

Our Pro-X3 line is for all-day everyday protection for riders of all types. The Youth Pro-X3 Baselayer Shirt is a multi-panel design with breathable compression fabric for a superior fit. The shirt features shoulder and rib protection featuring our impact-absorbing SmartFlex padding for world-class protection without sacrificing fit and comfort.