The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
A League of Its Own Since their inception, bike trainers have set out to solve one problem: simulating outdoor riding, indoors. Then came smart trainers and indoor cycling apps, complete with virtual races, group rides and controlled workouts. Suddenly athletes across disciplines were eager to ride indoors. The indoor training renaissance isn’t over. To make the experience even better, and to harness all the benefits riding indoors has to offer, you need a way to stay comfortable and engaged. The MP1 Nfinity Side-to-side movement isn’t new, but it also doesn’t capture the natural movement you experience outdoors. The MP1 with Nfinity technology truly moves the way you do because it adds the fore/aft axis to the equation. The MP1 combines over 20 years of indoor training expertise to not only create the movement platform category – but to perfect it. The result is an unparalleled trainer platform that reimagines the indoor trainer experience altogether. Features Introducing Nfinity Technology In order to bring stationary cycling to life, the MP1 needed movement in multiple axes. The result is an innovative technology combining curves, axes, gravity physics and mechanical ingenuity. The MP1 is the only way to experience this revolutionary technology. Compatible with Nearly Any Bike Trainer If you can experience the freedom of movement indoors, then why limit access with trainer compatibility? We believe that anyone with a bike trainer that fits should be able to tap into the benefits of Saris Nfinity Technology via a ride on the MP1 – which is pretty much everyone. So grab your trainer and check our bike trainer fit guide. Increased Comfort Riding a bike indoors can be uncomfortable because your movement is typically limited by the trainer. Pressure mapping and motion capture technology shows the MP1 significantly alleviates saddle and foot pressure compared to riding a static trainer. Recruit More Muscles It’s true that adding your trainer of choice to the MP1 engages more muscles than a stationary ride. From engaging the upper body to get through sticky spots to activating smaller, key muscles to stay balanced, the MP1 is the only way to recruit large and small muscle groups while riding inside. Adjustable Touch Points The MP1 is compatible with a wide range of setups. Complete with adjustable touch points and well-placed grip tape, the MP1 platform can be used with nearly every indoor bike trainer and training footprint. Looks Good, Too The MP1 looks as good as it moves. The platform deck is made from beautiful birch, while steel sourced from America’s heartland ensures the MP1 can handle the hardest of efforts. For the most cohesive aesthetic, the MP1 is the cornerstone of the Saris trainer eco-system, complete with the trainer desk and smart trainer of choice. It’s Fun, Pure and Simple Our goal was to make the time spent indoors as enjoyable as possible. The movement platform not only enhances the virtual training experience, the MP1 with Nfinity Technology brings indoor training to life. - Nfinity Technology: revolutionary tech that brings movement indoors. - Movement for All: compatible with a variety of training configurations; bikes, desks and nearly every trainer available. - Trailblazing: the MP1 ushers in a type of riding never seen or felt before. - Pure Fun: a responsive, immersive and authentic training experience that’s anything but boring. - Get Comfortable: reduces pressure on touch points so you can put in the miles. - Eye-Catching: mix of steel, aluminum and birch compliment most training spaces. - Personalized Eco-System: put the MP1 at the center with your trainer of choice to create your ideal training station. Specs - Max Fore-Aft Travel: 9.5” - Max Side-to-Side Angle: 6° - Compatible with all major brands and models of bike trainers. - Materials: Steel, aluminum and birch - Weight: 62 lb - Dimensions: 6” tall x 63” long x 35.5” wide - Fully assembled in box - Grip tape strategically placed to assist in walking on the trainer platform. - Tested to the combined weight (rider, bike and trainer) of 350 lb. - Built-in front wheel block for road and MTB.
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
$54.00 - $106.50
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller. - Pickup and transmit your heart rate data with a comfortable fit - Low energy ANT + (2.4GHz) wireless protocol - Minoura is an official ANT + Alliance member - Universal on every ANT + device - Net Weight: 67 grams (including battery) - Battery: 1 x CR2032
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller. - Pickup and transmit the speed and cadence data - Separate type - Low energy ANT+ wireless protocol - Minoura is an official ANT+ Alliance Member - Universal on every ANT+ device
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version. - Only compatible with the Rock and Roll trainer - This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup) - Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Previous page Page 2 of 2